Fluance Brings RT87 Turntable to Europe with Dual Plinth Design and High-Fidelity Precision
An innovative design, carbon fibre tonearm and two cartridge options bring serious vinyl credentials...

Three finishes (natural walnut, piano black or piano white) allow the RT87 to complement all living spaces, while this belt-drive model combines a substantial acrylic platter, an adjustable carbon fibre tonearm and a choice of Ortofon 2M Blue cartridge or an Audio-Technica AT-VM95ML.
From the dual-plinth architecture to the precision tonearm and cartridge, the RT87 puts vibration control and accurate groove tracking at the centre of its design.
“With the RT87, we wanted to push every aspect of high-fidelity playback performance further; from vibration isolation to tonearm precision,” said Justin Koetsier, Product Manager at Fluance. “Every decision behind this turntable was made with musical accuracy in mind. As more listeners demand higher-resolution analog systems, the demand is no longer just for a turntable, but for a platform that allows the stylus to retrieve the clearest possible signal from the groove.”
The dual-plinth explained
The RT87’s defining engineering feature is its dual-plinth construction. The motor sits on the lower section, while the spindle, platter and tonearm are isolated above it. Conical isolators separate the two layers, helping to prevent unwanted vibration from travelling through the structure to the stylus. The wood cabinet combines a 36mm lower plinth with a 21mm upper layer.
The motor also has seven-point silicone isolation and a decoupling ring. Together, these innovations are designed to keep mechanical interference away from the record. Fluance’s aim is a quieter background, allowing voices, instruments and the space around them to come through with greater clarity.
A turntable that grows with you
There is a choice of two moving-magnet cartridges. The Ortofon 2M Blue pairs a nude elliptical stylus with a 20Hz–20kHz response (+2/−1dB), 25dB separation at 1kHz and 5.5mV output. The Audio-Technica AT-VM95ML uses a Microlinear stylus and offers a 20Hz–25kHz frequency response, 23dB channel separation at 1kHz and 3.5mV output.
Both cartridges partner a straight, one-piece carbon fibre tonearm with a 230mm effective length. Its combination of low mass and rigidity is intended to control resonance, while the arm’s geometry helps minimise tracking error. A hanging weight and thread provide adjustable anti-skating force, helping the stylus follow both groove walls evenly.
There is room to fine-tune the setup, too. Adjustable vertical tracking angle (VTA), lets owners change the tonearm height to suit the cartridge. The adjustment range is 6mm, and the removable headshell makes cartridge changes more convenient. Supported cartridge weights run from 5g to 9.5g, with heights from 15mm to 21mm, allowing upgrades over time. The RT87 is a turntable built for decades of use.
Flexibility for all hi-fi systems
The 22mm acrylic platter weighs 1.85kg and gives the RT87 a distinctive visual centrepiece. Its mass helps maintain rotational inertia, while the material damps unwanted vibration. There is no need for a separate platter mat which gives the RT87 a modern, stylised appearance. Underneath, a continuous round-profile rubber belt reduces the contact area through which motor vibration can reach the platter.
The RT87 connects through Tiffany-styled gold-plated RCA sockets and includes a ground terminal. A separate phono preamp or an amplifier, speaker or receiver with a suitable phono input is required. This gives owners flexibility within a traditional component hi-fi system, or an active speaker set-up such as the Fluance Ri71.
A tinted dust cover, RCA cable, ground wire, power adaptor, bubble level and VTA adjustment tool are included, alongside the platter, belt, headshell and cartridge.
Full specifications are listed at the bottom of this page.
Availability
The Fluance RT87 is available now, priced €818.99, £699.99, $799.99 USD, $699.99 CAD.
For review requests, please contact Starscream Communications.
Starscream Communications
About Fluance
Founded in 1999, Fluance is a North American-based audio brand dedicated to redefining high-fidelity home audio experiences with powered speakers, turntables, and music systems. Built on the belief that audio should be experienced in its purest form, Fluance combines expert engineering, premium components, and meticulous craftsmanship to deliver an authentic, immersive sound experience. Fluance products can be purchased directly at www.fluance.com
GALLERY
SPECIFICATIONS
Cabinet | MDF dual plinth; upper 21mm, lower 36mm; conical isolation between layers |
Drive and motor | Belt drive; servo-controlled DC motor; speed analysed 500 times per second |
Motor isolation | Lower-plinth mounting; seven-point silicone isolation and decoupling ring |
Speeds | 33⅓, 45 and 78rpm; dedicated 78rpm stylus strongly recommended for 78rpm records |
Speed variation | 0.08% at 33⅓rpm; 0.06% at 45rpm; 0.01% at 78rpm |
Wow and flutter | 0.06% |
Noise performance | Weighted signal-to-noise ratio: 69.5dB with AT-VM95ML; 71dB with 2M Blue. Rumble: <−58dBA |
Platter | Acrylic; 300mm diameter; 22mm thick; 1.85kg; no mat required |
Belt | Round, jointless rubber loop; 1.85mm width; 915mm length |
Operation | Manual tonearm; CNC metal cueing lever; auto-stop stops platter only; no automatic arm lift or return |
Tonearm | Statically balanced, straight, one-piece carbon fibre tube; effective length 230mm |
Tonearm geometry | Pivot-to-spindle: 211.5mm; overhang: 18.5mm; headshell offset: 24° |
Adjustment | VTA height range: 6mm; adjustable hanging-weight-and-thread anti-skating |
Cartridge compatibility | Weight: 5–9.5g; height: 15–21mm |
Headshell and counterweight | H-4 bayonet headshell; 7.8g including wires. Adjustable CW106 counterweight: 106g; optional CW86 and CW134 weights |
Tonearm wiring | P Triple C 36 AWG Litz cable; seven strands, twisted pairs |
Cartridge options | Audio-Technica AT-VM95ML or Ortofon 2M Blue. Both moving magnet, with half-inch mounting and aluminium cantilevers |
Stylus and replacement | AT-VM95ML: Microlinear, nude square shank; 2.2 × 0.12mil. Replacement: AT-VMN95ML
2M Blue: nude elliptical; 0.71 × 0.31mil. Replacement: Ortofon Stylus 2M Blue |
Cartridge response and output | AT-VM95ML: 20Hz–25kHz; 3.5mV
2M Blue: 20Hz–20kHz (+2/−1dB); 5.5mV |
Channel performance | Separation at 1kHz: AT-VM95ML, 23dB; 2M Blue, 25dB. Channel balance: 1.5dB at 1kHz for both |
Recommended load | AT-VM95ML: 47kΩ; 100–200pF
2M Blue: 47kΩ; 150–300pF |
Cartridge dimensions and VTA | AT-VM95ML: 6.1g; 17.2mm high; VTA 23°
2M Blue: 7.2g; 18mm high; VTA 20° |
Connections | Tiffany-style 24k gold-plated RCA sockets; ground terminal |
Phono stage and wireless | No built-in phono preamp or line output; external phono stage or amplifier phono input required. No built-in wireless playback |
Power | Adaptor input: 100–240V AC, 50/60Hz; output: 12V / 500mA; consumption: 1.5W |
Dimensions and weight | H × W × D: 16.0 (±1.25) × 42.0 × 36.2cm; 9.5kg |
Operating temperature | 5–35°C |
Certifications | ICES, FCC, CE and RoHS, as listed by Fluance |
Included accessories | Tinted dust cover and hinges; 22mm acrylic platter; round belt; headshell with selected cartridge; anti-skate weight; counterweight; 5ft power adaptor; 3ft 90pF RCA cable (CA03); 3ft ground wire (GW03); bubble level; 2mm VTA hex wrench; transit screw hole covers; user manual |








































