iBasso’s DC-Tonfa DAC brings desktop power to a pocket-sized form factor

The new USB dongle delivers up to 800mW per channel into 32 ohms and the 3.5mm headphone jack doubles as a digital output for your hi-fi...

iBasso has fitted an eight-channel resistor-ladder (R2R) digital-to-analogue converter into a USB headphone amp just 61mm long. Called the DC-Tonfa, it plugs into a phone for music on the move or a laptop at your desk. Switch USB modes and the same dongle becomes an external DAC and amp for Nintendo Switch 2 or PlayStation 5.

iBasso developed the DC-Tonfa with Japanese headphone retailer e☆イヤホン, which helped shape the product design, accessories and sound tuning.

Give your headphones more power and adjust gain settings

The 4.4mm balanced output delivers up to 800mW per channel into 32 ohms. Headphones with a conventional 3.5mm plug get 219mW per channel into the same load. That gives the balanced connection the most headroom for demanding headphones, including harder-to-drive in-ear monitors.The balanced output’s dynamic range is 123dB, against 115dB for the single-ended socket.

The amplifier uses two Texas Instruments dual op-amps and four BUF634A buffers. Both headphone outputs have two selectable gain settings, high and low, so you can match the output level to the headphones you use. The balanced socket delivers up to 5.2V RMS in high gain, while the 3.5mm socket reaches 2.6V RMS.

With a 48kHz track playing in non-oversampling mode, the DC-Tonfa’s current draw is less than 100mA from a 5V supply. Keeping the current draw low was a design priority for use with power-limited portable devices.

R2R explained

In an R2R DAC, a ladder of resistors turns a digital recording into an analogue signal. The accuracy of that conversion depends in part on how closely the resistors match their intended values and how stable they remain as the temperature changes. Of the 312 precision metal film resistors in the DC-Tonfa, 60 form a dedicated compensation network. A field-programmable gate array (FPGA) running iBasso’s own algorithms corrects for small variations between individual resistor values in real time.

The 24-bit converter uses a fully balanced, differential design. This helps control distortion as the signal crosses zero, improving accuracy.

Play a track and you can compare five playback options. Non-oversampling mode preserves the incoming sample rate. For a different sonic presentation, you can select one of four digital filters developed by iBasso. Android users can also select filters, adjust gain and set the left and right channel balance in the iBasso UAC app. On Windows and macOS, the control panel simply opens in a browser.

Ready for life on the go or on your desktop

Over USB, the DC-Tonfa accepts a PCM signal at up to 768kHz and native DSD512. USB Audio Class 2.0 covers iOS and Android phones and tablets, plus Windows, macOS and Linux. For consoles such as Switch 2 and PS5, you simply select USB Audio Class 1.0.

For anyone who already owns a desktop DAC, the 3.5mm socket has a extra feature. Select S/PDIF output on the dongle or in the Android app and it passes a digital PCM signal at up to 768kHz to your hi-fi.

Availability and pricing

The DC-Tonfa is out now priced £329, $359, €329.99.

In the UK, you can also buy direct from AMP3. Review samples are now available.

For more press releases from Starscream, click here.

Starscream Communications

Starscream Communications

 

SPECIFICATIONS

Feature

Specification

 

 

DAC

24-bit, eight-channel discrete R2R, fully balanced and fully differential

Resistor network

312 precision metal film resistors, including 60 for hardware compensation

Clock and processing

Dual Accusilicon femtosecond oscillators and an iBasso FPGA with real-time resistor compensation

Amplification

Two Texas Instruments dual op-amps and four BUF634A buffers

USB audio formats

PCM up to 768 kHz and native DSD512

Playback modes

Non-oversampling (NOS) and four digital filters

Digital output

S/PDIF via the 3.5 mm socket, supporting PCM up to 768 kHz

Compatibility

USB Audio Class 2.0 for iOS, Android, Windows, macOS and Linux. Class 1.0 for PlayStation 5 and Nintendo Switch 2.

Controls

0.96-inch OLED display and multifunction knob. Android app and browser-based controls for Windows and macOS.

Current draw

Less than 100 mA at 5 V during 48 kHz playback in NOS mode

Dimensions and weight

61 × 34.6 × 15 mm, 45 g

Headphone outputs

Measurement

4.4 mm balanced

3.5 mm single-ended

Power per channel into 32 Ω

800 mW at THD < 0.5%

219 mW at THD < 0.1%

Output level, high / low gain

5.2 / 2.6 V RMS

2.6 / 1.3 V RMS

Signal-to-noise ratio¹

122 dB

118 dB

Dynamic range¹

123 dB

115 dB

Total harmonic distortion + noise

0.004%

0.0056%

Crosstalk

124 dB

121 dB

Output impedance

0.5 Ω

0.2 Ω

Frequency response at −0.3 dB

10 Hz–22 kHz

10 Hz–22 kHz

Frequency response at −0.8 dB

10 Hz–40 kHz

10 Hz–40 kHz

 

Share

Get updates in your mailbox

By clicking "Subscribe" I confirm I have read and agree to the Privacy Policy.

About Starscream Communications

A UK and US PR agency for consumer audio brands and pro audio brands. Think headphones, speakers, streaming, turntables, amps, DACs, software, plug-ins and DAWs. For more about our events, clients and work, check out the site.

All imagery, video and editorial content on this site is copyright and owned by Starscream Communications.

Contact

142 Camden Street, London, NW1 9PF

+44 (0)207 459 4463

hi@starscreamcommunications.com

www.starscreamcommunications.com